Welcome!
We are thrilled to offer the HotSpot AG’s Variable Rate Fertigation Skid’s with Simplot Grower Solutions. Below outlines the types of skids, process, training videos, resources, and support contacts to make the most out of the automated fertigation solution. Let’s get started!
Steps Toward Automated Fertigation

| Style and GPH Range | Status | Mainline PSI | Self-Priming | Flowmeter Type | Electrical Requirements | Tank Requirements | Plumbing Requirements | Usage Notes |
|---|---|---|---|---|---|---|---|---|
| 13-53 GPH | Commercially Deployed | Up to 60 psi mainline pressure | No | None – Based on volume per stroke | 120 VAC 1 AMP | – | Requires a 3/4″ port on irrigation mainline per leg | Greenhouse applications and handling caustic materials |
| 30-540 GPH | Commercially Deployed | Up to 100 psi mainline pressure | No | 1″ Keyence Pipe | 120 VAC 10 AMP/Leg (non-GFI) 480 VAC 2.5 AMP/Leg | Cone bottom required T required to fill up and pull fertilizer from tank 1 ft lower than fertilizer in tank | Requires a 1″ port on irrigation mainline per leg | For growers pulling from one tank throughout the year |
| 3 Channel 18-180 GPH Venturi* | Available in 2025 | Up to 70 psi mainline pressure | Yes | Seametrics PE202-075 | 480 VAC 3 Phase VAC 4 AMP | – | Requires two 2″ ports on irrigation mainline downstream of flowmeter and filters | Inject up to three types of fertilizers, one at a time. System includes self flushing of venturi and flowmeter for increased reliability |
Flow rates are dependent on the density of the fertilizer and mainline pressure. Table to visualize estimated max injection rates based on mainline pressure is in development.
30-540 GPH Injection Fert Skid
In this video, James Nichols will walk you through the components of our 30 to 540 gallon per hour high flow fertigation skid. James explains the pump, the variable frequency drive, the flow meter, and other important features. Additionally, James shows how to use the skid in batch mode and through the scheduler. By the end of the video, you’ll have a clear understanding of how to operate and track the fertilizer injection process. No action is required from you, but it is encouraged to watch the video to familiarize yourself with this equipment.
13-53 GPH Injection Fert Skid
In this video, James Nichols will walk you through the components of our 53 GPH Fertigation Skid. By the end of the video, you’ll have a clear understanding of how to operate and track the fertilizer injection process. No action is required from you, but it is encouraged to watch the video to familiarize yourself with this equipment.
Pre-installation
Single-Day Scheduling
Multi-Day Scheduling
How to invite new users to HotSpot AG
Single-Day Scheduling
Multi-Day Scheduling
How to invite new users to HotSpot AG
Post-installation
Schedule your 1×1 training with our Customer Success Team to review questions and other inquiries.

Steven Soares
Senior Customer Success Manager (Central Valley)

Phil Ready
Customer Success Manager(Central Coast)

Jonathan Hornung
Customer Success Manager
(Kern County)








